Honeywell DOMONIAL User Manual page 27

DISARMING
To disarm, press the disarm button
The indicator light comes on briefly when you release the button.
The disarming tone is emitted by the panel siren.
PERSONAL ATTACK
* This function is optional, and can be set up at installation.
These keys enable you to send an alarm at any time.
Press and
The indicator light on the keyfob comes on briefly when you release the button.
The siren is triggered.
The alarm company is alerted.
The panic function can be used even when your system is not armed. If this has been
set up by the installer, the siren stops automatically after 30 seconds, but you can stop it
manually by pressing the disarm button
Stopping the siren does not interrupt the transmission to the alarm company.
SPECIAL KEY
The action of the
As an assistance button it enables you to call for assistance from your alarm company.
Press the key, pause until the indicator light comes on, then press again.
As a remote control for electrical appliances, press the key to turn each appliance on
and off successively.
* This function requires an optional X10 extension with X10 receivers. Depending on your needs, your
installer will advise you on the different options for controlling appliances.
key is dependent on your configuration.
27