Forward Facing Installation With Lap Belt And Top Tether - Baby Trend CV88C Owner's Manual

Table of Contents

Advertisement

5.0 Installation and Use
5.6 Forward Facing Installation with Lap Belt and Top Tether
Requirements. See section 2.3:
Weight is 23 - 65 lbs (10.43 - 29 kg)
Height is 50 inches (127 cm) or less.
Age is 1 year old.
1. Ensure that the harness is adjusted to position
3 or 4. Only use recline positions 5 and 4 in
forward facing positions.
2. Ensure vehicle is level and that the
Convertible is placed flat, and rests on the
front outer edge of the vehicle seat.
3. Lift back flap and place harness to side.
31
Top Tether
Rear of Vehicle
Copyright © 2016, Baby Trend, Inc.
5.0 Installation and Use
4. Unlock and lower Forward Facing Lock-off.
5. Route vehicle lap belt through forward facing
belt path.
6. Put weight in seat with hand to compress
the automobile seat cushion then insert the
buckle tongue into the buckle and adjust the
vehicle lap/shoulder belt as tight as possible.
Pull up on buckle tongue to ensure the buckle
is secure.
7. Raise Forward Lock-off over the vehicle lap
belt. Engage the lock tab and press down to
lock.
8. Lower flap and secure hook and loop
fasteners.
Copyright © 2016, Baby Trend, Inc.
32

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents