Table of Contents
Advertisement
Record mode
Recording
still pictures
onto
a card
•
On-screen
display
in the card
(Photoshot)
(PV-GS85 only)
recording
mode
i_iHHHHHHHHHHHHHHHHHHHH_
_HHHHH_iHiHH HiHHHHHHHHHHHHHHHHHHH
_iHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH_
• Set to Card Recording
Mode.
1 Press the Photoshot
button [O]-
©
o
• To record still pictures clearly
• When zooming
in on the subject
with a
magnification
of 4x or higher, it is difficult to
reduce
the slight shaking from holding the
Camcorder
by hand. We recommend
decreasing the zoom magnification
and
approaching
the subject when recording.
• When recording still pictures, hold the
Camcorder
firmly with your hands and keep
your arms stationary at your side so as not to
shake the Camcorder.
• You can record stable pictures without shaking
by using a tripod.
• For the number of still pictures to be recorded
on a card, refer to -7/-.
• Moving pictures and sound cannot be recorded
onto a card.
• While data is being recorded on a card, do not
operate the mode dial.
• When the access lamp is lit, do not remove the
card.
• Another product may degrade or not play back
data recorded on this Camcorder.
• If you set [PICT.QUALITY]
>> [==%],mosaic-
pattern noise may appear on a playback image
depending on the picture content.
3]
4)
1)
Still picture size
2)
Card indication (-.;_*-)
3)
Number of recordable still pictures
(When no picture can be recorded, this
indication will flash in red.)
4)
Quality of still pictures
•
Select
the picture
quality
for
photoshot
images
1 Set [BASIC] >> [PICT.QUALITY]
>> select
the desired picture quality.
[ ==!== ]: High picture quality
[_=]: Normal picture quality
• You can also change the picture quality on
[ADVANCED]
>> [PICT.QUALITY]
in the tape
recording mode.
•
Recording
with a shutter
operation
effect
You can add a shutter operation simulating
sound.
1 Set [ADVANCED]
>> [SHTR EFFECT] >>
[ON].
30
LSQT1121
Hide quick links:
Advertisement
Table of Contents
