Table of Contents
Advertisement
Others
Indications
1 : A sentence is displayed in red in the screen
center.
• Read the contents and respond to them. (-6o-)
2: The remaining tape time indication
disappears.
• The remaining tape time indication may
disappear temporarily
during frame-by-frame
playback or other operation. If you continue
ordinary recording or playback, the indication is
restored.
3: The remaining tape time Indication does not
match the actual remaining tape time.
• If scenes of less than 15 seconds are
continuously
recorded, the remaining tape time
cannot be correctly displayed.
• In some cases, the remaining tape time
indication may show remaining tape time that is
2 to 3 minutes shorter than the actual
remaining tape time.
4:The function indications
such as the mode
indication or the remaining tape time
indication are not shown.
• If you set [SETUP] >> [DISPLAY]
>> [OFF],
indications other than the tape running
condition, warning, and date indications
disappear.
Playback (Sound)
1: Sound is not played back from the built-in
speaker of the Camcorder.
• Is the volume too low? During playback, push
the [-_/VOL+]
lever to display the volume
indication and adjust it. (-4o-)
2: Different sounds are reproduced
at the
same time.
• Have you set [SETUP] >> [AUDIO OUT] >>
[STEREO] and reproduced a picture containing
the main sound and sub sound? Set to [L] to
hear main sound, and setto [R] to hear the sub
sound. (-._s-)
Playback (Pictures)
1: Although the Camcorder is correctly connected
to a TV, playback images cannot be seen.
The playback images are vertical.
• Have you selected video input on the TV?
Please read the operating instructions
of your
TV and select the channel that matches the
input terminals used for the connection.
• Is the [TV ASPECT] setting correct? Change
the setting to match the aspect ratio of the TV.
[SETUP] >> [TV ASPECT] >> [16:9] or [4:3].
2: Mosaic-pattern
noise appears on images
during cue or review playback.
• This phenomenon
is characteristic
of digital
video systems.
It is not a malfunction.
3: Horizontal stripes appear on images
during
cue and review playback.
• Horizontal stripes may appear depending on
the scene, but this is not a malfunction.
4: Playback picture is not clear.
• Are the heads of the Camcorder
dirty? If the
heads are dirty, playback image cannot be
clear. Clean the heads by using the head
cleaner for digital video (optional). (-6.4-)
• If the terminal for the AV cable is soiled, noises
may appear on the screen. Wipe the soil off the
terminal with a soft cloth, and then connect the
cable to the A/V terminal.
• Is a picture containing a copyright protection
signal (copy guard) being recorded? When a
protected picture is played back by the
Camcorder,
mosaic-like patterns appear on the
picture.
53
LSQT1121
Hide quick links:
Advertisement
Table of Contents
