Recording Still Pictures Onto A Card (Photoshot) - Panasonic NV-GS330 Operating Instructions Manual

Hide thumbs Also See for NV-GS330:
Table of Contents

Advertisement

Recording still pictures onto a card
(Photoshot)
≥Set to Card Recording Mode.
1
Press the [
adjust focusing. (For auto focusing only)
≥If you set [O.I.S.] to [ON], then the image
stabilizer function will be more effective.
([
(MEGA OIS)] will be indicated.)
MEGA
≥The iris/gain value is fixed and this camera
focuses on the subject automatically.
1
2
1 Shutter chance mark
± (The white lamp flashes.):
¥ (The green lamp lights up.):
No mark:
≥The shutter chance mark is indicated as
follows when the [
halfway. Please use it as a guide for
recording.
¥ (The green lamp lights up.):
± (The white lamp lights up.):
2 Focus area
2
Press the [
28
Downloaded From VideoCamera-Manual.com Manuals
VQT1L43
] button halfway in order to
Focusing
When in focus
When focusing is unsuccessful
] button is not pressed
When in focus and a good
picture can be recorded
Almost in focus
] button fully.
Record mode
ª
To record still pictures clearly
≥When zooming in on the subject with a
magnification of 4k or higher, it is difficult to
reduce the slight shaking from holding the
movie camera by hand. We recommend
decreasing the zoom magnification and
approaching the subject when recording.
≥When recording still pictures, hold the movie
camera firmly with your hands and keep your
arms stationary at your side so as not to shake
the movie camera.
≥You can record stable pictures without shaking
by using a tripod and the remote control.
≥For the number of still pictures to be recorded
on a card, refer to
≥The moving picture and sound cannot be
recorded.
≥While data are recorded on a card, do not
operate the mode dial.
≥When the access lamp is lit, do not insert or
remove a card.
≥Another product may degrade or not play back
data recorded on this camera.
≥If set [PICT.QUALITY] >> [
noise may appear on a playback image
depending on the picture content.
≥When the [PICTURE SIZE] is set to other than
[
] or [
is set.
≥It is not possible to press the [PHOTO SHOT]
button on the remote control halfway.
ª
On-screen display in the card
recording mode
1) Still picture size
2) Card indication (
3) Number of recordable still pictures
(When no picture can be recorded, this
indication will flash in red.)
4) Quality of still pictures
.
-78-
], mosaic-pattern
], the mega pixel recording mode
100
100
2.4
)
-65-
1)
2)
3)
4)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents