Record mode
Zoom in/out function
You can zoom in up to 32× optically.
oSet to Tape/Card
Recording Mode.
1 Wide-angle
recording (zoom out):
Push the [W/T] lever towards [W].
Close=up recording (zoom in):
Push the [W/T] lever towards [T].
W
T
• When zooming in and taking a picture while
holding the Camcorder
by hand, we recommend
using the optical image stabilizer function.
oWhen you are zooming in on a faraway subject,
a sharper focus is achieved if the recording
subject is 1.3 m (4.3 feet) or further from the
Camcorder.
oWhen the zoom speed is high, the subject may
not be focused easily.
oWhen the zoom magnification
is 1x, the
Camcorder can focus on a subject approx. 2 cm
(0.8 inches) away from the lens.
oBe aware that a mechanical
sound may be
recorded when the [W/T] lever is released while
zooming. Gently move the zoom lever back to
it's original position before releasing it.
•
Digital
zoom
function
If the zoom magnification
exceeds 32 times, then
the digital zoom function will be activated. The
digital zoom function allows you to select a
magnification
from 50× to 1000×.
• Set to Tape Recording
Mode.
1 Set [ADVANCED]
>> [D.ZOOM] >> [50×] or
[1000×].
[OFF]:Optical
zoom only (Up to 32×)
[50×]:Digital
zoom (Up to 50×)
[1000×]:Digital
zoom (Up to 1000×)
• The larger the digital zoom magnification,
the
more the image quality is degraded.
• When the Card Recording mode is used, the
digital zoom function cannot be used.
•
About
the variable
speed
zoom
function
• The zoom speed varies according to the amount
of movement of the [W/T] lever.
•
To use the zoom
microphone
function
Interlocked with the zooming operation, the
microphone
will clearly capture sounds far away
with the tele-shot or those in the vicinity with the
wide-angle shot.
• Set to Tape Recording
Mode.
1 Set [ADVANCED]
>> [ZOOM MIC] >> [ON].
31
LSQT1121