Pc Connection With The Dv Interface Cable - Panasonic PV-GS80 Operating Instructions Manual

Edit mode
• Regardless of the menu settings on the
recorder, digital dubbing is carried out in the
same mode as the [AUDIO REC] mode of the
playback tape.
• The images on the recorder monitor may be
disturbed, but it does not affect the recorded
images.
• If a picture containing a copyright protection
signal (copy guard) is recorded by the
Camcorder, the picture is distorted by mosaic-
like patterns at playback.
• Disconnect the USB cable since input signals
from the external input terminal cannot be
recorded while it is connected with the USB
cable.
• While pictures are input from the DV terminal,
the operation icon blinks on instead of
appearing from the side of the screen when you
press the center of the joystick.
• While pictures are input from the DV terminal,
the TV aspect will not change even if you
change the setting for [TV ASPECT] in the
[SETUP] menu.
CAUTION:
Unauthorized exchanging and/or copying of
copyrighted recordings may be copyright
infringement.
PC Connection with the DV Interface
Cable
i
A video clip can be transferred directly to your PC
(personal computer) via a DV Interface Cable
(optional) using products and software from a
number of video editing software companies.
Using products from video editing software
companies allows you to capture and edit video
clips using the DV Interface.
Panasonic DVC are OHCl compliant and
should have no problem working with any
OHCI compliant FireWire Card/Video --
Editing software package.
• Personal computer must be equipped with a DV
Terminal.
• During Camcorder playback, do not disconnect
the DV Interface Cable or turn the Camcorder
off as this may cause a PC hang-up error.
• IEEE1394 Interface must conform to OHCI
(Open Host Controller Interface Specification).
47
LSQT1121