Table of Contents
Advertisement
Connection and
recognition
Connection and recognition
procedures
After the software is installed, the unit must be
connected to the PC and be correctly recognised
by the PC.
≥ Remove the supplied CD-ROM from your PC.
¬ Connect this unit to the AC adaptor
and turn on the unit.
1
Connect this unit and a PC.
A USB cable (supplied)
≥ Insert the USB connectors as far as they will
go.
≥ Do not use any other USB connection cables
except the supplied one. (Operation is not
guaranteed with any other USB cables.)
The USB function selection screen will appear.
2
Select [PC CONNECT] # [HDD]
or [SD CARD] then press the
joystick.
This unit is automatically detected by the PC.
≥ When the unit is connected to a PC, its
power cannot be turned off. Disconnect the
USB cable before turning this unit off.
(l 82)
≥ Do not disconnect the USB cable or AC
adaptor while the access lamp is on or access
icon (
monitor. Doing so may damage the data on the
HDD or SD card.
≥ The HDD and SD card cannot be accessed
simultaneously.
≥ It may be necessary to reboot the PC after
connecting this unit to it for the first time.
About the PC display
When the unit is connected to a PC, it is
recognised as an external drive.
≥ This unit supports only the readout of data
using the PC. The PC cannot write data to the
unit, or erase data from the unit.
≥ Depending on the operating environment of the
PC, the shape of the drive icon and the drive
name will differ.
∫ Drive icons
The icon is displayed in [My Computer (Computer)].
When accessing the HDD
≥ Windows Vista:
A
≥ Windows XP:
≥ Windows 2000:
When accessing the card
≥ Windows Vista:
≥ Windows XP:
≥ Windows 2000:
or
) appears on the LCD
With a PC
81
LSQT1363
Advertisement
Table of Contents
