Table of Contents
Advertisement
3
Select a file to be printed, then
press the joystick.
The number of pictures set is displayed.
4
Move the joystick up or down to
select the desired number of
prints, then press the joystick.
≥ You can set up to 9 prints.
≥ To cancel the setting, set the number of prints
to [0].
≥ Up to 8 files displayed on a page can be set in
succession by repeating steps 3 and 4.
5
Press the MENU button to
display the PictBridge menus.
6
Select the date print setting on
[DATE PRINT].
≥ If the printer is not capable of date printing, this
setting is unavailable.
7
Select the paper size setting on
[PAPER SIZE].
[STANDARD]: Size specific to the printer
[4t5 INCH]:
L size
[5t7 INCH]:
2L size
[4t6 INCH]:
Postcard size
[A4]:
≥ You cannot set paper sizes not supported on
the printer.
8
Select the layout setting on
[PAGE LAYOUT].
[STANDARD]: Layout specific to the printer
[
]:
[
]:
≥ You cannot set page layouts not supported on
the printer.
9
Select [PRINT] # [YES] and
press the joystick.
The pictures are printed.
≥ Exit PictBridge by disconnecting the USB cable
after the pictures have been printed.
MENU
When you want to stop printing halfway
Move the joystick down.
A confirmation message appears. If [YES] is
selected, the number of prints set is cancelled
and the screen returns to step 3. If [NO] is
selected, all the settings are kept and the screen
returns to step 3.
≥ Avoid the following operations during printing.
These operations disable proper printing.
jDisconnecting the USB cable
jOpening the card slot cover
jSwitching the mode dial
jTurning off the power
≥ Check the settings for the paper size, quality of
print, etc. on the printer.
≥ The sides of pictures recorded when [
set may be cut at printing. Check before
printing.
When using a printer with a trimming or
borderless printing function, cancel this
function before printing. (Refer to the operating
instructions of the printer for details.)
With other products
A4 size
No frame print
Frame print
] is
2
73
LSQT1363
Advertisement
Table of Contents
