Turning the power on and off with the LCD monitor/viewfinder
When the mode is set to
the viewfinder.
Open the LCD monitor or extend the viewfinder to turn on the unit.
The power will not turn off unless the LCD monitor is closed and the viewfinder is retracted.
The power will not turn off while recording motion pictures even if the LCD monitor is closed and the
viewfinder is retracted.
To turn on the power
HDC-TM300
The status indicator lights.
To turn off the power
HDC-TM300
The status indicator goes off.
Change the mode to OFF when this unit is not being used.
or
, the power can be turned on and off with the LCD monitor and
HDC-HS300
HDC-HS300
31
VQT1Z09