Optical Image Stabilizer Function - Panasonic HDC-HS300P/PC Operating Instructions Manual

Recording
5
Recording (Basic)
Optical image stabilizer can stabilize the image without decreasing the image quality as much.
Change the mode to
This function's default setting is on.
Set the Intelligent Auto Mode to off before turning the Optical Image Stabilizer function to off.
In the following cases, the image stabilizer function may not work effectively.
When the unit is shaken greatly
When you record a moving subject while tracking it
When recording yourself in Still Picture Recording Mode or using a tripod, we recommend setting this
function to (MODE2).
Optical image stabilizer
function
or .
O.I.S.
Optical Image Stabilizer button
Press this button to switch on/off the
image stabilizer function.
In Motion Picture Recording Mode,
appears on the screen, and the image
stabilizer function works all the time.
In Still Picture Recording Mode, each time
the button is pressed, the indication
changes by one setting in the following
order:
OFF
(MODE1):
The function works all the time.
(MODE2):
The function works when the
is pressed.
O.I.S.: Optical Image Stabilizer
button
63
VQT1Z09