Af Tracking - Panasonic HDC-HS300P/PC Operating Instructions Manual

Recording
6
Recording (Basic)
It is possible to set the focus and exposure to the subject specified on the touch screen.
The focus and exposure will keep following the subject automatically even if it moves. (Dynamic tracking)
Change the mode to
1
Touch .
Target frame
will be displayed on the screen.
The prioritized face framing (orange) will
change to the target frame when the
Intelligent Auto Mode is
it will track the face that was framed.
Available target lock range will be displayed
in red frame when the Intelligent Auto Mode
is set to anything but
2
Touch the object and lock the target.
When you touch the head of the object, the
target frame on the head gets locked and
tracking starts.
Touch the object to be changed again
when you want to change the target.
When the Intelligent Auto Mode is
selected, the setting becomes
(normal) and touched object is tracked.
Selection becomes
target frame is locked on a face.
64
VQT1Z09

AF tracking

or .
3
(Portrait), and
(Portrait).
(Portrait) when
Start recording.
When you touch [RETURN], the tracking
function will be canceled.
About target frame
The frame out assist is displayed when the
target frame gets close to framing out.
When target lock fails, the target frame blinks
in red and then disappears. In such cases,
touch the object again and lock the target.
When the button is pressed halfway, the
focus is set to the object that is locked. The
target frame turns green when it focuses, and
the target cannot be changed.