Table of Contents
Advertisement
With a PC
2
Setup
Connect this unit to the PC after the software applications are installed.
Remove the supplied CD-ROM from your PC.
USB cable (supplied)
1
Connect this unit to the AC
adaptor.
It is possible to use the unit connected to the
PC with the batteries only, but you will not be
able to write data into the unit.
2
Turn on the unit.
This function is available in all modes.
3
Connect this unit to a PC.
The USB function selection screen will appear.
Insert the USB connectors as far as they will go.
Do not use any other USB cables except the
supplied one. (Operation is not guaranteed
with any other USB cables.)
4
Touch [PC].
This unit is automatically recognized as an
external drive of the PC. (F 135)
Connecting to a PC
When the unit is connected to a PC, its
power cannot be turned off.
Disconnect the USB cable, before turning
this unit off.
Do not disconnect the USB cable or the AC
adaptor while the access lamp is on or card
access icon (
or the AC adaptor while the access lamp is on
or built-in memory access icon (
on the unit screen.
or the AC adaptor while the HDD access lamp
is on or HDD access icon (
the unit screen.
) appears on the unit screen.
Do not disconnect the USB cable
) appears
Do not disconnect the USB cable
) appears on
133
VQT1Z09
Advertisement
Table of Contents
