Panasonic HDC-HS300P/PC Operating Instructions Manual page 123

3
Select print source media and
touch the icon.
Select print source media and
touch the icon.
If the [PictBridge] indication does not appear or
continues to flash, disconnect and then
reconnect the USB cable.
4
Touch a still picture to be printed.
5
Touch / to set the number of
prints.
Touch [ENTER] after the number of prints is
set.
You can set up to 9 prints.
To cancel the setting, set the number of prints
to [0].
Up to 99 files can be set in succession.
6
Touch .
7
Touch [DATE PRINT] to select the
date print setting.
If the printer is not capable of date printing, this
setting is unavailable.
1
123
VQT1Z09