Recording With Manual Focus - Panasonic HDC-HS300P/PC Operating Instructions Manual

Recording
4
Recording
(Advanced)
Perform focus adjustments using the multi manual ring.
If auto focusing is difficult due to the conditions, then use manual focus.
Change the mode to
Press the FOCUS button.
MF appears on the screen.
Rotate the multi manual ring to adjust the focus.
1
(When MF assist function is used)
Select the menu. (F 33)
[RECORD SETUP]
It is possible to set from the quick menu.
(F 34)
This function's default setting is [ON].
2
Adjust the focus by rotating the
ring.
MF MF
The center of the screen is enlarged. The normal
screen returns approximately 2 seconds after
you finish bringing the subject into focus.
The center of the screen is not enlarged when
[MF ASSIST] is [OFF].
Press the FOCUS button again to restore to
auto focus.

Recording with manual focus

.
or
 
[MF ASSIST] [ON]
Zoom operation cannot be performed using the
multi manual ring.
MF Assist does not work when the Digital
Zoom is used.
The part of the screen that is enlarged is not
enlarged on the image actually recorded.
FOCUS
85
VQT1Z09