Turning The Power On And Off With The Lcd Monitor/Viewfinder - Panasonic HDCTM300 - HD SD CAMCORDER Operating Instructions Manual

Turning the power on and off with the LCD monitor/viewfinder

When the mode is set to
the viewfinder.
Open the LCD monitor or extend the viewfinder to turn on the unit.
≥ The power will not turn off unless the LCD monitor is closed and the viewfinder is retracted.
≥ The power will not turn off while recording motion pictures even if the LCD monitor is closed and the
viewfinder is retracted.
∫ To turn on the power
HDC-TM300
A The status indicator lights.
∫ To turn off the power
HDC-TM300
A The status indicator goes off.
Change the mode to OFF when this unit is not being used.
or , the power can be turned on and off with the LCD monitor and
HDC-HS300
HDC-HS300
31
VQT1Z09