Inserting/Removing An Sd Card - Panasonic HDC-HS300P/PC Operating Instructions Manual

Inserting/removing an SD card

When using an SD card not from Panasonic, or one previously used on other equipment, for the first
time on this unit, format the SD card. (F 106) When the SD card is formatted, all of the recorded
data is deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto a PC, DVD
disc etc. before proceeding with the formatting. (F 114, 125)
Caution:
When the SD card is removed while the access lamp is lit, this unit may malfunction or the data
recorded on the SD card may be lost.
OPEN
Do not touch the terminals on the back of the SD card.
Do not apply strong shocks, bend, or drop the SD card.
Electrical noise, static electricity or the failure of this unit or the SD card may damage or erase the
data stored on the SD card.
When the card access lamp is lit, do not:
Remove the SD card
Turn the unit off
Insert and remove the USB cable
Expose the unit to vibrations or shock
Performing the above while the lamp is on may result in damage to data/SD card or this unit.
Access lamp [ACCESS]
When this unit is accessing the SD card or
built-in memory, the access lamp lights up.
1
Open the LCD monitor.
Check that the access lamp has gone off.
2
Open the SD card cover by
sliding the OPEN lever
3
Insert/remove the SD card.
Face the label side
the illustration and press it straight in as far as
it will go.
Press the center of the SD card and then pull it
straight out.
4
Securely close the SD card cover.
Securely close it until it clicks.
.
in the direction shown in
29
VQT1Z09