Displaying Disc Information - Panasonic HDC-DX1 Operating Instructions Manual

Disc and card management
Rotate the mode dial to select
¬
rotate the mode dial to
select the [ ] (motion picture
playback) tab.
1
Press the MENU button, then
select [SETUP]
[AUTO PROTECT]
press the cursor button.
≥This function's default setting is [ON].
≥We recommend that the auto protect
function is set to [ON] in order to prevent
accidental deletion on other devices. If
discs recorded on this unit are inserted into
other devices without protecting them, a
message may be displayed prompting you
to format the disc. If the disc is formatted,
the data on it will be erased, and the
process cannot be reversed.
≥Even if a disc with no recorded motion pictures
is ejected, it will not be protected.
ª To release the disc protection
Erase all the motion pictures on the disc or
format the disc.
≥Please be aware that if a disc is formatted, then
all the data recorded will be erased and cannot
be recovered.
≥The disc will need to be re-formatted on the
device you will use.
84
VQT1A15
or
and then
#
[ON] and
#
MENU

Displaying disc information

Information such as the type of recorded disc,
the number of recorded scenes, the remaining
space and whether or not the disc is finalized is
displayed.
Rotate the mode dial to select
¬
and then select the [
picture playback) tab.
Press the MENU button, then select
[SETUP] [INFORMATION]
#
and press the cursor button.
To exit the information screen
Press the MENU button.
(RAM) (-RW) (-R) (-R\DL)
] (motion
[YES]
#
MENU