Panasonic HDC-DX1 Operating Instructions Manual page 89

3 Connecting with the component cable (supplied) and the AV cable
(supplied)
1
Connect this unit and a TV with the component cable (supplied) and the
AV cable (supplied).
A/V
A Component cable (supplied)
B AV cable (supplied)
≥Connect to terminals of the same colour.
≥The component terminal C is for outputting images only so be sure to also connect the AV cable.
(Insert it in the audio input terminal for the component terminal input. Refer to the operating
instructions of the TV for details.)
2
Set the mode dial to
3
Select the input channel on the TV.
Example: Select the [Component] channel etc.
(The name of the channel may differ depending on the connected TV.)
4
Start playback on this unit.
The image and audio are output on the TV.
ª About the setting when connecting the component terminals
When this unit is connected to a TV with the component cable, the output setting on this unit can be
changed. Set it to match the terminal on the TV that you connect to.
Press the MENU button, then select [SETUP]
item and press the cursor button.
[576i]: When connecting to the component terminal on the TV compatible with 576i.
(Playback is in standard quality.)
[1080i]: When connecting to the component terminal on the TV compatible with 1080i.
(Playback is in high definition quality.)
A
COMPONENT
B
to turn on the power.
With other products
C
COMPONENT
VIDEO IN
AUDIO IN
[COMPONENT OUT] desired
>
89
VQT1A15