Table of Contents
Advertisement
LSQT1157_EB.book 78 ページ ２００６年１２月１１日 月曜日 午後８時４６分
Disc and card management
[FORMAT DISC] # [YES] and
press the joystick.
≥ When formatting a DVD-RAM, skip to step 3.
2
(When formatting a DVD-RW only)
Select format type (l 20), then
press the joystick.
3
When the confirmation message
appears, select [YES], then press
the joystick.
≥ When formatting is complete, press the MENU
button to exit the message screen.
≥ In the case of a double sided disc, format each
side.
≥ It may not be possible to format a disc with
many scratches or dirt. Such discs cannot be
used.
≥ During formatting, do not turn this unit off.
≥ When you format the disc, use a battery with
sufficient battery power or the AC adaptor.
≥ Use this unit to format discs. This unit may not
recognize some discs that have been
formatted using a computer or a device other
than this unit.
Displaying disc information
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
Information such as the number of recorded
scenes, the remaining space and whether or not
the disc is finalized or protected is displayed.
78
LSQT1157
¬ Rotate the mode dial to select
.
Press the MENU button, then select
[DISC SETUP] # [INFORMATION] #
MENU
[YES] and press the joystick.
To exit the information screen
Press the MENU button.
Card management
Formatting an SD card
This is for initializing cards.
Please be aware that if an SD card is formatted,
then all the data recorded on the card will be
erased. Store important data on a computer, etc.
¬ Rotate the mode dial to select
.
1
Press the MENU button, then
select [SETUP] #
[FORMAT CARD] # [YES] and
press the joystick.
or
MENU
(SD)
or
MENU
Advertisement
Table of Contents
