Panasonic HDC-DX1 Operating Instructions Manual page 90

With other products
ª If the image or audio from this unit is not output on the TV
≥Check that the plugs are inserted as far as they go.
≥Check the connected terminal.
≥Check the TV's input setting (input switch). (For more information, please read the operating
instructions for the TV.)
≥If the images are not displayed correctly on a wide-screen TV, adjust the setting in screen mode on
the TV. (For more information, please read the operating instructions of the TV.) If the pictures are
displayed squeezed horizontally on a regular TV (4:3), change the setting on this unit. (l 85)
4 Connecting with the AV cable (supplied)
1
Connect this unit and a TV with the AV cable (supplied).
A/V
A AV cable (supplied)
2
Set the mode dial to
3
Select the input channel on the TV.
Example: Select the [Video 2] channel etc.
(The name of the channel may differ depending on the cable.)
4
Start playback on this unit.
The image and audio are output on the TV.
ª If the image or audio from this unit is not output on the TV
≥Check that the plugs are inserted as far as they go.
≥Check the connected terminal.
≥Check the TV's input setting (input switch). (For more information, please read the operating
instructions for the TV.)
≥When a HDMI cable is connected at the same time, priority is given to the output from the HDMI
cable.
≥When the component cable is connected at the same time, priority is given to the component cable for
image output.
≥If the images are not displayed correctly on a wide-screen TV, adjust the setting in screen mode on
the TV. (For more information, please read the operating instructions of the TV.) If the pictures are
displayed squeezed horizontally on a regular TV (4:3), change the setting on this unit. (l 85)
90
VQT1A15
A
to turn on the power.
VIDEO IN
AUDIO IN