Panasonic HDC-DX1 Operating Instructions Manual page 95

6
Select the paper size setting on
[PAPER SIZE].
[STANDARD]: Size specific to the printer
[4k5 INCH]: L size
[5k7 INCH]: 2L size
[4k6 INCH]: Postcard size
[A4]: A4 size
≥You cannot set paper sizes not supported on
the printer.
7
Select the layout setting on
[PAGE LAYOUT].
[STANDARD]: Layout specific to the printer
[ ]: No frame print
[ ]: Frame print
≥You cannot set page layouts not supported on
the printer.
8
Select [PRINT]
the cursor button to print the
pictures.
≥Exit PictBridge by disconnecting the USB
cable (supplied) after the pictures have
been printed.
[YES] and press
#
When you stop printing halfway
Move the cursor button down.
≥A confirmation message appears. If [YES] is
selected, the number of prints set is cancelled
and the screen returns to step 2. If [NO] is
selected, all the settings are kept and the
screen returns to step 3.
≥Avoid the following operations during printing.
These operations disable proper printing.
– Disconnecting the USB cable
– Removing the SD card
– Switching the mode dial
– Turning off the power
≥Check the settings for the paper size, quality of
print, etc. on the printer.
≥The edges of still pictures recorded on this unit
with a 16:9 aspect ratio may be cut at printing.
Check before printing. When using a printer
with a trimming or borderless printing function,
cancel this function before printing. (Refer to
the operating instructions of the printer for
details.)
≥You may not be able to print still pictures
recorded with other products.
≥When the unit is connected directly to the
printer, the DPOF settings cannot be used.
≥Connect the printer directly to this unit. Do not
use a USB hub.
With other products
95
VQT1A15