Disc And Card Management; Formatting; Formatting Discs; Formatting An Sd Card - Panasonic HDC-DX1 Operating Instructions Manual

Disc and card management

Disc and card
management

Formatting

Formatting discs

This is for initializing discs.
Please be aware that if a disc is formatted,
then all the data recorded on the disc will be
erased.
Rotate the mode dial to select
¬
rotate the mode dial to
select the [ ] (motion picture
playback) tab.
1
Press the MENU button, then
select [SETUP]
[FORMAT DISC]
press the cursor button.
2
When the confirmation message
appears, select [YES], then press
the cursor button.
≥When formatting is complete, press the
MENU button to exit the message screen.
≥Use this unit to format discs.
≥In the case of a double sided disc, format each
side.
≥It may not be possible to format a disc with
many scratches or dirt. Such discs cannot be
used.
≥During formatting, do not turn this unit off.
≥When you format the disc, use a battery with
sufficient battery power or the AC adaptor.
80
VQT1A15
(RAM) (-RW)
or
and then
#
[YES] and
#
MENU

Formatting an SD card

This is for initializing SD cards.
Please be aware that if an SD card is
formatted, then all the data recorded on the
card will be erased. Store important data on a
computer, etc.
Rotate the mode dial to select
¬
.
1
Press the MENU button, then
select [SETUP]
[FORMAT CARD]
press the cursor button.
2
When the confirmation message
appears, select [YES], then press
the cursor button.
≥When formatting is complete, press the
MENU button to exit the message screen.
≥Use this unit to format SD cards. If an SD card
is formatted on other products (such as a
computer), the time spent for recording may
become longer and you may not be able to use
the SD card.
≥Depending on the type of SD card being used,
it may take time to format.
≥During formatting, do not turn this unit off.
≥When you format the SD card, use a battery
with sufficient battery power or the AC adaptor.
≥Do not remove the SD card while formatting.
(SD)
or
#
[YES] and
#
MENU