Table of Contents
Advertisement
Managing the copied disc
(Formatting, Auto protect, Displaying disc information)
p Connect this unit to the DVD burner and then touch [PLAY DISC]. (F 100)
w Formatting discs
This is for initializing DVD-RAM and DVD-RW
discs.
Please be aware that if a disc is formatted,
then all the data recorded on the disc will be
erased. Back up important data on a PC etc.
Select the menu. (F 28)
[DISC SETUP]
[FORMAT DISC]
p When the confirmation message appears,
touch [YES].
p When formatting is complete, touch [EXIT] to
exit the message screen.
p Connect this unit and the DVD burner to format
discs. You may no longer be able to use the
discs if you format them on another device
such as a PC etc.
w Auto protect
You can protect (write protect) a DVD-RAM or
DVD-RW disc when copying motion pictures or
still pictures in high definition picture quality to
the disc.
1
Select the menu. (F 28)
[DISC SETUP]
[AUTO PROTECT]
p The default setting is [ON].
p If a disc that you copied to is inserted in
another device without protecting it, a message
may be displayed prompting you to format the
disc. We recommend setting
[AUTO PROTECT] to [ON] in order to prevent
accidental deletion.
2
Copy to the disc. (F 102)
p The copied disc is write protected when it is
ejected if [AUTO PROTECT] is [ON].
106
VQT1Y31
To release the disc protection
p If you format a disc, the auto protection is
released. Please be aware that all the data
recorded on the disc is erased and cannot be
recovered.
p The disc will need to be re-formatted on the
device you will use.
w Displaying disc information
Information such as the type of recorded disc,
[YES]
the number of recorded scenes and whether or
not the disc is finalized is displayed.
Select the menu. (F 28)
[DISC SETUP]
p Touch [EXIT] to exit the information screen.
[ON]
[DISC STATUS]
[YES]
Advertisement
Table of Contents
