Table of Contents
Advertisement
MASONRY INSTALLATION
READ THIS ENTIRE MANUAL THROUGH BEFORE STARTING TO BUILD A MASONRY
FIREPLACE. THERE ARE CERTAIN SPECIFICATIONS AND MEASUREMENTS LISTED IN
THE MASONRY SPECIFICATIONS PORTION OF THIS MANUAL THAT MUST BE MET TO
INSURE A PROPER INSTALLATION. FAILURE TO FOLLOW THESE SPECIFICATIONS
MAY PRESENT A FIRE HAZARD. THE DIRECTIONS BELOW ILLUSTRATE ONE WAY OF
BUILDING A MASONRY FIREPLACE. ASK THE DEALER OR TALK TO AN INSTALLER FOR
OTHER OPTIONS. THIS INSTALLATION SHOULD ONLY BE PERFORMED BY A
QUALIFIED MASON.
The illustrations below demonstrate the order in which the masonry construction takes place.
All work should be done to follow local building codes and regulations. Because of the vast
difference between certain masonry installations, this section will be handled in a very
general format.
Step #1 - Concrete Footing.
A concrete footing should be
made following all specifications
that apply.
Foundation depth as required
by local Bldg. Code, min. 12"
thick and 6" beyond walls of
fireplace.
Page 38
Advertisement
Table of Contents
