Table of Contents
Advertisement
8
86
Align silencer 3, hold retaining
plate 2 in position and install
screw 1.
Silencer to rear-seat
z
frame
10 Nm
Slip the clamp forward as far as
it will go and turn it so that the
(GS) mark 1 on the clamp is in
line with mark 2.
Tighten screw 1.
Clamp to silencer and
exhaust manifold
25 Nm
Headlight
Removing and installing
light housing
Switching off ignition (
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Slacken screw 1 several turns.
Carefully ease the bottom of
light housing 2 in the direction
30).
Advertisement
Table of Contents
