Table of Contents
Advertisement
indicated (arrow) and lift up to
remove.
Position light housing 1 behind
lug 2 and pivot it down.
Centre light housing 1.
A blow to the light housing
can push the clip out of
shape. This would mean that
the security of the light housing
would no longer be ensured.
Do not apply force.
Use a screwdriver to push
screw 2 up.
Pivot the light housing back.
Clip 1 engages the light hous-
ing.
Tighten screw 2.
Lighting
Replacing bulbs for low-
beam and high-beam
headlight
Switching off ignition (
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove the light housing
(
86).
Disconnect plug 1 for low-
beam and high-beam head-
light.
8
87
30).
z
Advertisement
Table of Contents
