Registration Of The Remote Con; Control; Trol - BMW R nineT Rider's Manual

step in the programming
5
routine.
50 The DWA status indicator light
stops flashing and four acknow-
ledgement tones sound.
Registration of the
remote control
with anti-theft alarm
When is it necessary to
register a remote control?
If you want to register an addi-
tional remote control or register
a remote control as a replace-
ment for one that has been mis-
laid, you must always register all
z
the remote control units with the
DWA anti-theft alarm. You can
register a maximum of 4 remote
control units.
Registering remote

control

OE
Deactivate the alarm function.
Switch on the ignition.
Press button 2 three times.
Acknowledgement tone sounds
once.
Within ten seconds, switch off
the ignition.
Press button 2 three times.
Acknowledgement tone sounds
once.
Within ten seconds, switch on
the ignition.
Acknowledgement tone sounds
twice.
You can now register a maximum
of 4 remote control units with the
DWA anti-theft alarm. Registra-
tion is a three-step process and
has to be repeated for each re-
mote control unit.
Press and hold down button 1
and button 2.
LED flashes for ten seconds.
As soon as the LED goes out,
release button 1 and button 2.
LED lights up.
Press button 1 or button 2.
Alarm tone sounds once.
LED goes out.
Remote control has been re-
gistered.
Repeat this three-step proced-
ure for each additional remote
control.