Table of Contents
Advertisement
"Activation after ignition OFF" is
5
programmed.
Turn indicators flash once.
48
Alarm tone sounds once (if
programmed).
Alarm function is deactivated.
Conserving battery power
Approximately one hour after the
alarm is armed, the receiver for
the remote control in the DWA
anti-theft alarm shuts down in
order not to draw power un-
necessarily from the battery. If
you want to deactivate the alarm
function after the receiver has
shut down in this way, you have
to switch the ignition on.
z
Programming
with anti-theft alarm
Programming options
You can customise the follow-
ing parameters of your anti-theft
alarm:
Confirmation alarm tone after
activation/deactivation of the
anti-theft alarm (DWA) in ad-
dition to visual confirmation by
turn indicators flashing
Rising and falling or intermittent
alarm tone
Automatic activation of the
alarm function after the igni-
tion is switched off
Default settings
The anti-theft alarm ships with
the following default settings:
Confirmation alarm tone after
activation/deactivation of the
anti-theft alarm (DWA): No
OE
Alarm tone: Intermittent
Automatic activation of the
alarm function after the igni-
tion is switched off: No
Programming anti-theft
alarm (DWA)
Deactivate the alarm function.
Switch on the ignition.
Press button 1 three times.
Acknowledgement tone sounds
once.
Within ten seconds, switch off
the ignition.
Press button 2 three times.
Acknowledgement tone sounds
once.
Within ten seconds, switch on
the ignition.
Acknowledgement tone sounds
three times.
Advertisement
Table of Contents
