Display Setup Screen - Panasonic AG-HPX170P Operating Instructions Manual

Setup menu list (continued)
AV IN/OUT SETUP screen (continued)
Item
INT MIC

DISPLAY SETUP screen

Item
ZEBRA DETECT 1
ZEBRA DETECT 
MARKER
SAFETY ZONE
FOCUS BAR
VIDEO OUT OSD
DATE/TIME
LEVEL METER
ZOOM·FOCUS
CARD/BATT
PCARD REMAIN
108
Display
mode
(Camera) Determines whether or not input from the internal microphone is used
during recording.
ON: Uses internal microphone input.
OFF: Does not use internal microphone input.
Display
mode
(Camera) Selects the brightness level of the left-leaning zebra patterns on the
screen.
0%, %, 0%, %, 70%, 7%, 80%, 8%, 90%, 9%, 100%, 10%
(Camera) Selects the brightness level of the right-leaning zebra patterns on the
screen.
0%, %, 0%, %, 70%, 7%, 80%, 8%, 90%, 9%, 100%, 10%,
OFF
<Note>
The zebra patterns do not appear if you select OFF.
(Camera) Select ON to display the marker. (Page 40)
ON, OFF
To display the marker, press the ZEBRA button.
(Camera) Sets SAFETY ZONE to ON or OFF.
OFF, 90%, :, 1:9, 1:9
(Camera) Turns the FOCUS ASSIST bar display ON or OFF.
ON, OFF
When set to ON, the FOCUS ASSIST bar can be displayed.
(Camera) Select ON to output the information displayed on the screen together
(MCR) with the signals from the VIDEO IN/OUT jack.
ON, OFF
(Camera) Sets whether to display the date and time on the screen and whether to
(MCR) output from the VIDEO IN/OUT jack.
OFF:
The date and time are not displayed.
TIME:
The time is displayed.
DATE:
The date is displayed.
TIME&DATE:
The time and date are displayed.
(Camera) Select ON to display the audio level meter.
(MCR)
ON, OFF
(Camera) Selects the unit of zoom and focus values.
OFF, NUMBER, mm/feet, mm/m
<Note>
Use the mm/feet or mm/m display only as a general guideline since it is
not entirely accurate.
(Camera) Select ON to display the remaining P2 card recording capacity and
(MCR) remaining battery charge.
ON, OFF
(Camera) Determines how remaining P2 card capacity is displayed.
ONE-CARD: Displays how much space is left on the P2 card that is
(MCR)
currently being recorded.
TOTAL: Displays the total amount of space that is left on P2 cards
inserted in the camera.
Description of settings
Description of settings
___indicates the factory setting.