Saving Scene Files And Other Settings On Sd Memory Cards - Panasonic AG-HPX170P Operating Instructions Manual

Saving scene files and other settings on SD memory cards

You can save up to four scene file settings or other
settings as files on an SD memory card, and you
can also load them from the card.
• The data in all the scene files, F1 to F6, is
rewritten.
• Insert the SD memory card into the unit.
(Page 29)
If you have saved a scene file
1
Set the unit's POWER switch to ON.

Select SCENE FILE on the setting menu
CARD FUNCTIONS screen, select YES and
press the Operation lever. (or push it in the
q direction)
For all other settings, select USER FILE.
• For menu operations (Page 94)
• You can also use the menu buttons on the
remote control. (Page 14)
CARD FUNCTIONS
SCENE FILE
USER FILE
SD CARD FORMAT
LCD BACKLIGHT
LCD SET
EVF SET
SELF SHOOT
PUSH MENU TO RETURN

Push the Operation lever in the w or q
direction to select a file number (1 to 4).
SCENE FILE (SD CARD)
FILE SELECT
READ
WRITE
FILE 1
FILE 2
FILE 3
FILE 4
TITLE RELOAD
PUSH MENU TO RETURN
––––
––––
––––
NORMAL
––––
––––
MIRROR
1
––––
––––
NO FILE
NO FILE
NO FILE
NO FILE
––––

Push the Operation lever in the e or r
direction to select WRITE and press it
again.
SCENE FILE (SD CARD)
FILE SELECT
READ
WRITE
FILE 1
FILE 2
FILE 3
FILE 4
TITLE RELOAD
PUSH MENU TO RETURN

Push the Operation lever in the w direction
to display the screen below, then select
YES and press the Operation lever again.
• In the following example, TITLE 1 is the
filename. (To change the filename, see
page 56.)
SCENE FILE (SD CARD)
WRITE FILE 1
YES –– –  PUSH STILL
NO
TITLE EDIT
TITLE 1
+/– : PUSH q / g
SEL : PUSH t / y
PUSH MENU TO RETURN
The message shown below appears to indicate
that the change in scene file settings has been
completed.
NOW WRITING...
WRITE OK
(Continued on the next page)
1
––––
YES
NO FILE
NO FILE
NO FILE
NO FILE
––––
