Appendix - Panasonic AG-HPX170P Operating Instructions Manual

Appendix

Selecting the USER CLIP NAME
recording method
Press the MENU button and select META DATA
" PROPERTY " USER CLIP NAMEto select
the recording method. Two options are available:
TYPE1and TYPE2.
TYPE1
If clip metadata has
been read in
If no clip metadata
has been read in
or if the setting
for recording clip
metadata has been
turned off
TYPE2
If clip metadata has
been read in
If no clip metadata
has been read in
or if the setting
for recording clip
metadata has been
turned off
* The COUNT value is indicated as a four-digit
number.
The COUNT value is incremented each time a
new clip is captured if clip metadata has been
read in and TYPE2 has been selected as the
recording method.
The COUNT value can be reset using the
following procedure.
Press the MENU button and select META DATA
" PROPERTY " USER CLIP NAME to display
the menu shown below. Select "COUNT RESET"
with the cursor and press the Operation lever to
reset the COUNT value to 1.
1
USER CLIP NAME to
be recorded
Uploaded data
Same as GLOBAL
CLIP ID (UMID data)
USER CLIP NAME to
be recorded
Uploaded data +
COUNT value*
Same as CLIP NAME
When a P2 card with a memory capacity of 8
GB or more is used in this unit and a one-time
continuous recording exceeds the prescribed
duration (approx. 5 minutes for DVCPRO HD,
approx. 10 minutes for DVCPRO50 or approx.
20 minutes for DVCPRO or DV) or when a one-
time recording extends over more than one P2
card, the recording concerned will automatically
be undertaken as a separate clip.
At this time, each clip will be provided with its
own COUNT value.
Example of recording (DVCPRO50) a clip on one P2 card:
REC start
(recording start)
Recording duration = Approx. 15 min.
Clip 1
COUNT value = 0001
10 min.
Example of recording a clip on two P2 cards:
REC start
(recording start)
Clip 1
COUNT value = 0003
1st card
If the clip thumbnails are displayed as shown in the
example above or their properties are indicated
using a P2 device, the thumbnail and COUNT
value of clip 1 will be displayed.
REC/PAUSE
(recording pause)
Clip 2
COUNT value = 0002
5 min.
REC/PAUSE
(recording pause)
Clip 2
COUNT value = 0004
2nd card