Installing And Removing The Power Supply; Installing And Removing The Battery; Connecting And Disconnecting The Power Cord - Panasonic AG-HPX170P Operating Instructions Manual

Installing and removing the power supply

Installing and removing the battery

Installation
1
Insert the battery until it clicks into place.

Connecting and disconnecting the power cord

Installation
1
Connect the DC cord to the AC adapter.

Plug the AC power supply cord into the
power outlet.

Slide the DC cord's battery connector to
the direction of the arrow until it clicks into
place.
Removal
1
Set the POWER switch to OFF, and check
that the mode lamp is off.
1
DC cord's battery
connector
Removal
1
Set the POWER switch to OFF, and check
that the mode lamp is off.

While pressing the battery release button,
raise up the battery to remove it.
• Support the battery with your hand to ensure
that it will not fall.
Mode lamp
Battery release button

Slide the DC cord's battery connector to
the direction of the arrow while pressing
the battery release button.
Battery release button

Disconnect the AC power supply cord from
the power outlet.
CAUTION:
This apparatus can be operated at a voltage in
the range of 110 – 240 V AC.
Voltages other than 120 V are not intended for
U.S.A. and Canada.
Operation at a voltage other than 120 V AC may
require the use of a different AC plug. Please
contact either a local or foreign Panasonic
authorized service center for assistance in
selecting an alternate AC plug.