Table of Contents
Advertisement
SW MODE screen (continued)
Item
FOCUS ASSIST
MF ASSIST
WFM
LCD
AUTO SW screen
Item
A.IRIS
Display
mode
(Camera)
Allocates a function to the FOCUS ASSIST button.
EXPANDED:
Magnifies the center portion of the image.
GRAPH:
Displays a frequency distribution graph at the top right in the viewfinder
and LCD monitor.
BOTH:
Magnifies the center portion of the image and displays a histogram.
(Camera)
Automatically sets the last focus during manual focusing.
ON:
Automatically sets the last focus.
•
The focus may not be set correctly if the last focus differs
considerably from the manually set focus.
•
You cannot operate using the remote control connected to the CAM
REMOTE jack.
OFF:
The focus is not adjusted automatically.
(Camera)
Switches the waveform display that appears when the WFM button is
pressed.
WAVE:
Displays a waveform.
VECTOR:
Opens a vector display.
WAVE/VECT:
Each press of the button, switches the settings in the following order:
OFF " WAVE (waveform) " VECTOR (vector) " OFF.
(Camera)
Allocates a function to the LCD button.
LCD REV:
Flips the LCD image vertically and horizontally.
OVERSCAN:
Switches between overscan and underscan of the LCD/viewfinder
image.
This button toggles between the overscan and underscan image at
each press.
LCD BL:
Switches the brightness of the LCD backlight.
•
The brightness of the backlight set using LCD BL is retained when
functions assigned using the LCD button change.
Display
mode
(Camera)
ON:
Performs the auto iris control in auto mode. The IRIS button is
deactivated.
OFF:
Deactivates the auto iris control in auto mode. This performs the iris
control selected with the IRIS button.
Description of settings
Description of settings
___indicates the factory setting.
10
- Quick Links:
- Operating Instructions
Hide quick links:
Advertisement
Table of Contents
