Camera Setup Screen - Panasonic AG-HPX170P Operating Instructions Manual

Setup menu list (continued)
SCENE FILE screen (continued)
Item
V DETAIL FREQ
NAME EDIT

CAMERA SETUP screen

Item
ASPECT CONV
SETUP
100
Display
mode
(Camera) Sets the vertical detail for shooting in 480i progressive mode.
THIN: Makes the detail thin.
MID: Makes the detail slightly thicker.
THICK: Makes the detail thicker.
When images were shot in the progressive mode in which the vertical
detail is set as "THIN" or "MID" and are played on a monitoring
television (60i interlace), you will see flickers caused on horizontal
lines and almost horizontal oblique lines. When playing back images
in the progressive mode or when editing images or performing other
postprocessing, images with a higher resolution will be obtained with
the THIN or MID setting than with the THICK setting.
(Camera) Edits the name of the selected scene file you have selected with the
scene file dial.
Display
mode
(Camera) elects the aspect ratio of the image you record in 480i format. This item
cannot be selected when the 1080i or 720P recording format is used.
(Page 41)
SIDE CROP: Crops the right and left edges of the image.
LETTER BOX: Adds black bands at the top and bottom of the image.
SQUEEZE: Squeezes the image horizontally.
(Camera) Switch the setup level of video signals in 480i format using a P2 card.
0%:
Setup is switched to 0% for both the camera output and the recording.
7.%A:
Setup is switched to 7.5% for the camera output and 0% for the
recording.
Description of settings
Description of settings
___indicates the factory setting.