Nortel 2330 Installation Manual page 41

Figure 8. Step 4—Installing a T-bar Clamp
T-bar
5
Unlock the universal mounting bracket from the AP by inserting the 3-mm or 1/8-inch screwdriver into
the Unlock hole on the AP as shown in
Caution!
components, do not use excessive force when inserting a tool into the Unlock or
Lock hole.
Figure 9. Step 5—Unlocking the Bracket
6
Remove the bracket as shown in
Installing and connecting an AP-2330/2330A/2330B 41
T-bar clamp halves
Figure
To avoid damage to the AP's lock mechanism or electronic
Figure 10 on page
Nortel WLAN Access Point 2330/2330A/2330B Installation Guide
Slide together
9.
42.