Nortel 2330 Installation Manual page 46

46 Installing and connecting an AP-2330/2330A/2330B
4
Unlock the universal mounting bracket from the AP by inserting the 3-mm or 1/8-inch screwdriver into
the Unlock hole on the AP as shown in
Caution!
components, do not use excessive force when inserting a tool into the Unlock or
Lock hole.
Figure 17. Step 4—Unlocking the Bracket
5
Remove the bracket as shown in
Figure 18. Step 5—Removing the Bracket
6
Install the universal mounting bracket as follows onto the T-bar clamp:
a
As shown in
screw holes face downward and the two T-bar flanges face upward and are adjacent to the T-bar
edges.
b
Properly align the bracket for mounting by placing the bracket so that its port connector opening is
to the left of the hole you cut for the cables.
NN47250-302 (320661-E Version 02.01)
Figure
To avoid damage to the AP's lock mechanism or electronic
Figure 18 on page
Figure 19, place the universal mounting bracket against the T-bar clamp so that the two
17.
46.