Nortel 2330 Installation Manual page 39

Table 3: Required Mounting Hardware and Tools—
Mounting Option
Suspended ceiling—flush ceiling
tiles
Suspended ceiling—drop ceiling
tiles
Junction box
Solid wall or ceiling
Note.
Model AP-2330/2330A/2330B is plenum rated, so it can also be installed in the
space above the ceiling if preferred.
Figure 7 shows the universal mounting bracket.
Installing and connecting an AP-2330/2330A/2330B 39
Model AP-2330/2330A/2330B
Required Hardware and Tools
Mounting template
Universal mounting bracket
T-bar clamp
Note: A T-bar clamp is not required for a
23.9-mm (15/16-inch) T-bar ceiling with
flush ceiling tiles.
Box cutter
Small screwdriver (3-mm or 1/8-inch)
Mounting template
Universal mounting bracket
T-bar clamp
Box cutter
Small screwdriver (3-mm or 1/8-inch)
Junction box
Two #6-32 x 1-inch machine screws
Universal mounting bracket
Small screwdriver (3-mm or 1/8-inch)
#2 Phillips-head screwdriver
Two #6 sheet metal screws and two drywall
anchors
Universal mounting bracket
Hammer
Small screwdriver (3-mm or 1/8-inch)
#2 Phillips-head screwdriver
Nortel WLAN Access Point 2330/2330A/2330B Installation Guide
Included with the
Product
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
No
No
Yes
Yes
No
No
Yes
Yes
No
No
No