Error Codes; Information Code - Panasonic Panafax UF-7200 Operating Instructions Manual

Problem Solving

Information Code

When a problem occurs, the display may show one of the Information Codes listed below. These will help
you to identify and correct the problem.
Info.
Code
030 Document is misfeeding.
031 Document is too long or jammed.
Document length exceeds 39.4 inches (1000 mm).
The length limitation for 600 dpi, is subject to the
available Memory size.
600dpi
(Max. Length is 24 inches (600 mm))
061 ADF Cover is open.
400 During initial connection, receiving station did not
respond or communication error occurred.
402 During initial connection, communication error
occurred.
403 No polling capability at the remote side.
404/405 During initial connection, communication error
occurred.
406 Transmission Password does not match.
Receiving Password does not match.
Received from an unauthorized station in Selective
Reception mode.
407 No confirmation from the receiving station for the
previous page sent.
408/409 Remote side confirms previous page(s) is (are)
illegible.
410 Communication aborted by the transmitting side.
411 Polling password does not match.
412 No data from the transmitting side.
414 Polling password does not match.
415 Polling transmission error.
416/ Received data has too many errors.
417/
418/419
420/421 Machine goes to receiving mode, but receives no
command from the transmitting side.
422/427 Interface is incompatible.
430/434 Communication error occurred while receiving.
436/490 Received data has too many errors.
1
NOTE
1. After identifying the problem and taking the recommended action, if the Information Codes keep occurring or if Information
Codes that are not listed in the above table appear, please contact your local Panasonic Authorized Dealer.
52
Meaning Possible Action
1.Reload the document properly.
2.Remove the document jam.
1.Reload the document properly.
2.Remove the document jam.
Close the ADF Cover.
1.Check with the other party.
2.Reload the document and send
again.
Reload the document and send
again.
Ask remote side to set
"POLLED=ON".
Reload the document and send
again.
Check the password or the telephone
number in One-Touch or ABBR.
station.
Wait a few minutes and send again.
Wait a few minutes and send again.
Check with the other party.
Check the polling password.
Check with the other party.
Check the polling password.
Check the polling password.
Check with the other party.
1.Remote side misdial.
2.Check with the other party.
Check with the other party.
Check with the other party.
Check with the other party.
Page
46,47,
48,49
51
46,47,
48,49
51
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--