Table of Contents
Advertisement
b> Troubleshooting
Information Codes
When something unusual occurs, the display may show one of the Information Codes below. These will help
you to identify and correct the problem.
Meaning
No recording paper.
Load the paper.
Recording paper is too long or jammed.
Remove jammed paper.
Thermal Recording Head temperature is too high.
Wait a few minutes to permit cooling.
Document misfeeding
1. Reload the document properly.
35
2. Remove document jam.
86
Document misfeeding.
1, Reload the document properly,
35
——|—
Document paper is too short.
1, Reload the document properly.
:
2, Remove document jam.
During initial handshake, receiving station did not | 1. Check with the other party.
respond or communication error occurred.
2. Reload the document and send again.
Remote station required a Password to receive the | Check the remote station.
document.
Remote station has no Polling function.
Check the remote station.
During
initial
handshake,
communication
error | Reload the document and send again.
occurred,
Received from an unauthorized station in Selective | Checkthe telephone number inthe One-Touch
Reception mode.
or Directory Search Station.
No confirmation from the receiving station for the | Wait
a few minutes and send again.
previous page sent.
408/409 | Remote side confirmation of previous page sent.
Wait a few minutes and send again.
No data from the transmitting side.
Check with the other party.
416/417 | Received data has too many errors.
Check with the other party.
418/419
:
Apparatus goes to receiving mode, but receives no | 1. Remote side misdial.
command from the transmitting side.
2. Check with the other party.
During initial handshake,
received the disconnect | Check with the other party.
command from the transmitting side.
Communication error occurred while receiving.
Check with the other party.
Received data has too many errors.
Check with the other party.
Continued on the next page.
83
Advertisement
Table of Contents
