Panasonic Panafax UF-7200 Operating Instructions Manual page 45

Mode
Transmission Copy Vertical lines on the
Quality transmitted
document
Transmitted
document is blank
Print Copy Quality Vertical lines printing
on the received
document
Fuzzy print
Missing dots or lines/
inconsistent
darkness within print
Fading print
Faint print
Communication No dial tone
No auto answer
Cannot transmit or
receive
No Unit Operation No unit operation
Symptom
Check own copy quality. If copy is OK, your machine has no
problem, report to the receiving party that they have a
problem. If copy is NG, clean the Document Scanning Area.
(Refer to the Operating Instructions (For Advanced
Operations) on the provided CD-ROM.)
1. Make sure the document is set face up.
2. Check own copy quality. If copy is OK, your machine has
no problem, report to the receiving party that they have a
problem. If copy is NG, clean the Document Scanning
Area.
1. Print out a Journal report (e.g.FUNCTION, 6, 1, SET and 1)
and check quality to make sure whether your machine has
trouble. (Refer to the Operating Instructions (For Advanced
Operations) on the provided CD-ROM.)
If Journal report quality is OK, your machine has no
problem, report to the sending party that they have a
problem.
2. Journal report quality is NG, replace the Toner Cartridge.
1. Make sure you are using the correct paper for the best
possible print quality.
(Refer to the Operating Instructions (For Advanced
Operations) on the provided CD-ROM.)
2. Try reversing the recording paper to the other side.
1. Make sure you are using the correct paper for the best
possible print quality.
(Refer to the Operating Instructions (For Advanced
Operations) on the provided CD-ROM.)
2. Replace the Toner Cartridge.
Your Toner Cartridge may be running out of toner. Replace
the Toner Cartridge.
You may need to choose a different paper for the best
possible print quality.
(Refer to the Operating Instructions (For Advanced
Operations) on the provided CD-ROM.)
1. Check the connection of the telephone line.
2. Check the telephone line.
1. Check the connection of the telephone line.
2. Check the Reception mode setting.
3. If the Fax Parameter No.13 (AUTO JOURNAL PRINT) is
set to "2:Valid" (default setting) and the machine is printing
the received document from memory, which also happens
to be the 200th transaction, the machine will not auto
answer until the Transaction Journal completes printing.
(Refer to the Operating Instructions (For Advanced
Operations) on the provided CD-ROM.)
An information code will be shown on the display. Refer to
the information code table to find out the trouble.
To reset the machine, first unplug the power cord of the
machine from the wall outlet. Wait for a few seconds and
plug the power cord of the machine in the wall outlet again.
Problem Solving
Cause / Action Page
--
32
--
--
40
9
--
9
40
40
9
25
25
--
--
52
25
45