Copy; Making A Copy - Panasonic KX-FP145C Operating Instructions Manual

6. Copy

Copying 6 Copy

6.1 Making a copy

1
{STOP}
{START}
{COPY}
1
Adjust the width of the document guides (1)
to fit the actual size of the document.
2
Insert the document (up to 10 pages) FACE
DOWN (2) until a single beep is heard and
the unit grasps the document.
L If the document guides are not adjusted
to fit the document, re-adjust them.
3
If necessary, press {A} or {B} repeatedly to
select the desired resolution.
4
Press {COPY}.
L If necessary, enter the number of copies
(up to 30).
5
Press {START}, or wait for 15 seconds.
L The unit will start copying.
Note:
L Any transmittable document can be copied
(page 31).
To select the resolution
Select the desired resolution according to the
type of document.
– "FINE": For printed or typewritten originals
with small print.
– "SUPER FINE": For originals with very small
print.
– "PHOTO": For originals containing
photographs, shaded drawings, etc.
L If you select "STANDARD", copying will be
done using "FINE" mode.
40
2
{>}{A}{B}
Quick scan feature
This feature is helpful when you want to copy the
document, then remove it for other uses. To use
this feature, activate feature #34 (page 52)
beforehand.
L The document will be fed into the unit and
scanned into memory. The unit will then print
the data.
If the document exceeds the memory
capacity, copying of the exceeded document
will be cancelled and this feature will be
turned OFF automatically.
To stop copying
Press {STOP}.
6.1.1 More copying features
To enlarge a document
1. Insert the document, then press {COPY}.
2. Press {>}.
3. Press {A} repeatedly to select "150%" or
"200%", then press {START}.
L The unit will only enlarge the centre of the
upper part of the document. To make an
enlarged copy of the bottom of the
document, turn the document around,
and then make a copy.
Example: 150% enlarged copy
Original document
A B
C D
To reduce a document
1. Insert the document, then press {COPY}.
2. Press {>}.
3. Press {B} repeatedly to select "92%", "86%"
or "72%", then press {START}.
Setting Recording
paper size
100% Letter
(default)
92% Letter
86% Letter
72% Letter
Enlarged copy
A B
C D
Original
document
size
Letter
A4
A4
Legal