Table of Contents
Advertisement
Ink film – installing /
Install the included ink film or replace the used ink film with a new one.
The following ink films are available for replacement.
Model No. KX-FA53A: Replacement film (1 roll)
Model No. KX-FA55A: Replacement film (2 rolls)
Each roll prints about 140 A4-sized pages or 150 letter-sized pages. See page 10 for accessory
information.
1
Open the front cover by pulling up the centre
part.
2
Push the back cover open button (green) on
the right side of the unit.
OR
Push the back cover open lever (green)
inside of the unit.
Open the back cover.
3
For first time installation of the supplied ink
film, skip to step 6.
4
For replacement only
Pull out the blue gear and remove the used
ink film. Remove the used core.
replacing!
Back cover
open lever (green)
Blue
(continued)
gear
Setup (Base Unit)
Centre part
Front cover
Back cover
open button
(green)
OR
Back cover
Used core
Used
ink film
13
Advertisement
Table of Contents
