Brady BBP12 User Manual page 32

Printer Initialization
Printer initialization is used to clear DRAM and restore printer settings to defaults. The
only exception is ribbon sensitivity, which will not be restored to default.
To activate Printer initialization:
1. Turn off the power switch.
2. Hold the Feed button down, then turn the power switch ON.
3. Release the button when the LED turns green after 5 amber blinks. (Any time during
the 5 blinks).
The LED color changes as follows:
•
BPP12 User Manual
Amber → Red (5 blinks) → Amber (5 blinks) → Green (5 blinks) →
Green/Amber (5 blinks) → Red/Amber (5 blinks) → Solid Green
32