Brady BBP12 User Manual page 41

Head Close
Label Top
Left Position
Reprint Mode
Format Convert
Note: If printing from enclosed software/driver, the software/driver will send out the
commands, which will overwrite the settings set from the panel.
BPP12 User Manual
This option is used to set the action of the media when you close
the print head.
Selections Description
Feed Printer will advance one label
Printer will calibration the sensor levels,
Calibration
determine length and feed label
Length Printer determine length and feed label
No Motion Printer will not move media
This option is used to adjust print position vertically on the label.
The range is -120 to +120 dots.
This option is used to adjust print position horizontally on the
label. The range is -9999 to +9999 dots.
When reprint mode is enabled, you can reprint the last label
printer by pressing "UP" button on printer's control panel.
Selects the bitmap scaling factor. The first number is the original
dots per inch (dpi) value; the second, the dpi to which you would
like to scale.
No
Motion
0
+0000
Disabled
None
41