Mapping External Lus Individually (Add Lu); Add Lu Window - HP StorageWorks XP12000 User Manual

Mapping external LUs individually (Add LU)

This section describes mapping operations starting with the Add LU command. Use the Add LU
(Figure 42), Select Paths
external LUs individually.
NOTE:
Before mapping the external LU, ensure that no other applications (such as RAID Manager XP) that use
the command device are executing. Stop any applications that are executing.
Figure 42 Add LU window
Vendor
•
External array's vendor.
Product
•
External array's product name.
Serial
•
External array's product serial number.
WWN
•
World Wide Name of the external array port used for connecting to the local array.
• LUN
LU number of the external LU.
• Device
External LU's device name.
• Ex-Dev. info.
External array information. When the external array is an XP1024/XP128 or TagmaStore
Workgroup Modular Storage (WMS) array, an asterisk (*) appears.
88 Configuring external LUs
(Figure 43), SSID (Figure 46), and Set SSID (Figure 47) panes for mapping