HP StorageWorks XP12000 User Manual page 165

Pane name
Port Type
Controller Option
Host Connection Mode
NOTE:
When using the Thunder 9500V subsystem as an external array, the following versions are recommended.
If you use a 9500V subsystem whose version is earlier than the following versions, the SATA drive's
information might not be displayed correctly.
• For Thunder 9530V, Thunder 9520V, Thunder 9570V: version 0658 or later
• For Thunder 9580V, Thunder 9585V: version 1658 or later
External Storage XP user guide for the XP12000, XP10000, SVS200
Parameter
ROM Microprogram
Version
RAM Microprogram
Version
WEB Title
Reset/LIP Mode
• Reset/LIP Mode
(Signal)
• Reset/LIP Mode
(Process)
• LIP Reset Mode
RS232C Error Information
Outflow Mode
Write and verify mode
Host Connection Mode 1
Host Connection Mode 2
Parameter setting
You can either specify this
parameter or omit
specifying this parameter.
You can either specify this
parameter or omit
specifying this parameter.
You can either specify this
parameter or omit
specifying this parameter.
You can either specify this
parameter or omit
specifying this parameter.
You can either specify this
parameter or omit
specifying this parameter.
You can either specify this
parameter or omit
specifying this parameter.
You can either specify this
parameter or omit
specifying this parameter.
Set this parameter to ON.
Set this parameter to
Standard Mode.
Specify HISUP Mode.
NOTE:
Do not specify any other
parameters.
165