Storage Arrays That Can Be Connected As External Arrays - HP StorageWorks XP12000 User Manual

Storage arrays that can be connected as external arrays

Table 2 lists storage arrays that can be connected as external arrays. Notes about the appearance
of each storage array in this document and in External Storage XP panes are also listed.
Table 2 Storage arrays that can be connected as external arrays
Storage array
HP StorageWorks XP12000 Disk
Array
HP StorageWorks XP10000 Disk
Array
HP StorageWorks XP1024/XP128
Disk Array
HP StorageWorks XP512/XP48 Disk
Array
HP StorageWorks XP256 Disk Array
HP StorageWorks 200 Storage
Virtualization System
HP StorageWorks 3000/5000
Enterprise Virtual Array
(Active/Standby and Active/Active
controllers) or HP StorageWorks
4000/6000/8000 Enterprise
Virtual Array (Active/Active
controllers)
HP StorageWorks MSA1000/1500
(Active/Standby)
TagmaStore™ Universal Storage
Platform subsystem
TagmaStore™ Network Storage
Controller subsystem
TagmaStore™ Adaptable Modular
Storage subsystem
20 Preparing for External Storage XP operations
Notes
• In External Storage XP panes, the array appears as "12000".
• Alternate paths are in Multi mode (meaning that dynamic load
balancing across multiple active paths is enabled).
• In External Storage XP panes, the array appears as "10000".
• Alternate paths are in Multi mode.
• In External Storage XP panes, the arrays appear as "1024" and
"128", respectively.
• Alternate paths are in Multi mode.
• In External Storage XP panes, the arrays appear as "512" and "48",
respectively.
• Alternate paths are in Multi mode.
• In External Storage XP panes, the array appears as "256".
• Alternate paths are in Multi mode.
• In External Storage XP panes, the array appears as "SVS200".
• Alternate paths are in Multi mode.
• In this user guide, the arrays appear as "EVA array".
• In External Storage XP panes, the arrays appear as "EVA".
• Alternate paths are in Single mode (meaning that dynamic load
balancing across multiple active paths is not enabled).
• In this user guide, the arrays appear as "MSA array".
• In External Storage XP panes, the arrays appear as "MSA".
• Alternate paths are in Single mode.
• In this user guide, the array appears as "TagmaStore™ USP
subsystem".
• In External Storage XP panes, the array appears as "USP".
• Alternate paths are in Multi mode.
• In this user guide, the array appears as "TagmaStore™ NSC
subsystem".
• In External Storage XP panes, the array appears as "NSC".
• Alternate paths are in Multi mode.
• In this user guide, the array appears as "TagmaStore™ AMS
subsystem".