Step 2: Initialize Stratalink And The Tapi Service Provider - Toshiba STRATA DK14 Installation And Maintenance Manual

Computer Telephony Integration
StrataLink and TAPI Service Provider for Windows

Step 2: Initialize StrataLink and the TAPI Service Provider

➤ To initialize StrataLink and TAPI Service Provider
1. Press the Windows Start button,
2. Click "Enable TAPI".
3. Press Driver Setup to configure
4. Select the Com Port that will be
5. You may type a name in the
6. Select phone type: 10- or 20-
7. Select the switch type from the
8. Select the shared line
15-4
select Programs, StrataLink,
and StrataLink.
the TAPI Service Provider.
used to make the connection to
the desktop telephone.
Phone Name box. This name
appears in the application on
the PC.
key.
drop-down menu.
appearance to enable incoming
calls to act like a key system.
Leave it unselected for a
standard TAPI (PBX interface).
The light above this box will be red at first, then yellow
as the TAPI Service Provider is initialized, and finally
green when initialization is complete.
2662
2695
Strata DK I&M 6/00