Ricoh SP C250DN Getting Started Manual page 38

Color laser printers
Hide thumbs Also See for SP C250DN:
Table of Contents

Advertisement

WEP Key Length Select 64 bits or 128 bits for the length of the WEP encryption key.
WEP Transmit
Key ID
WEP Key Format Select a format for entering the WEP key.
WEP Key Enter the WEP key. The number and type of characters you can enter vary
6. When finished, click [OK] to save changes.
7. Close web browser.
8. Disconnect Ethernet cable.
9. Turn printer power switch Off. Wait a moment, and turn On.
10. Next, install Network Printer Driver. See
Note: For further information on Web Image Monitor, please refer to the Operating Instructions, p101.
Using Infrastructure Mode
Infrastructure mode is the printer's default communication mode, as most Wi-Fi networks function in this
mode. This enables you to connect the device for communication through a single access point, i.e., your
wireless router.
Note: Ad-Hoc mode, also known as "peer-to-peer" mode, is also supported. Ad-Hoc networks do not
require a centralized access point. Instead, devices on the wireless network connect directly to each other.
For instance, if you set up the two laptops in Ad-Hoc wireless mode, they would connect directly to each
other, without the need for a centralized access point. This would be useful for a temporary connection,
e.g., you're away from the office/home and need to connect two devices via a Wi-Fi connection to
exchange files or other information when there is no other Wi-Fi network to connect both devices to.
To configure Infrastructure mode, proceed as follows:
1. Check that the wireless router is working correctly.
2. Press [Menu].
3. Scroll [
] to [Host Interface], and press [OK].
4. Scroll [
] to [Network Settings], and press [OK].
5. Scroll [
] to [Wi-Fi Config.], and press [OK].
6. Scroll [
] to [Setup Wizard], and press [OK].
7. Select [Infrastructure], and press [OK].
RICOH SP C250DN/SP C252DN Color Laser Printers
Select an ID number to identify each WEP key in case multiple WEP connections
are configured.
depending on the length and format selected for the key, as follows:
WEP key length: [64bits], Format: [Hexadecimal]
WEP key max length: 10 characters (0-9, A-F, a-f)
WEP key length: [64bits], Format: [ASCII]
WEP key max length: 5 characters (ASCII characters)
WEP key length: [128bits], Format: [Hexadecimal]
WEP key max length: 26 characters (0-9, A-F, a-f)
WEP key length: [128bits], Format: [ASCII]
WEP key max length: 13 characters (ASCII characters)
3.2 Network Printer Driver
Getting Started Guide
Install.
38

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sp c252dn

Table of Contents